wtb crossover tube bolts
#3
Launching!
Thread Starter
Join Date: Dec 2014
Location: Florida
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Really? i have this leak, and the bolt i have on the side that was leaking is differnt than the one thats not. i switched them around and now its leaking from the other side.
#4
TECH Addict
iTrader: (88)
Dorman sells new gasket for $5/set of 4 on rockauto.com
Maybe someone used a standard bolt, not metric. And it isn't sealing properly, just pick up 2 bolts and redo both sides and that should fix it
#5
Launching!
Thread Starter
Join Date: Dec 2014
Location: Florida
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Are you torquing them to 8ft lbs, make sure the gaskets are still good underneath or else it will leak.
Dorman sells new gasket for $5/set of 4 on rockauto.com
Maybe someone used a standard bolt, not metric. And it isn't sealing properly, just pick up 2 bolts and redo both sides and that should fix it
Dorman sells new gasket for $5/set of 4 on rockauto.com
Maybe someone used a standard bolt, not metric. And it isn't sealing properly, just pick up 2 bolts and redo both sides and that should fix it
#6
Launching!
Thread Starter
Join Date: Dec 2014
Location: Florida
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Update: it turns out i had the wrong sized bolt on one side and it caused it to not seal properly. would have never guessed it! thanks for the help i found the bolt right at ace hardware!