WTB: LS1 Fbody T56 parts
#1
Teching In
Thread Starter
Join Date: Dec 2013
Location: Monroe, Louisiana
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
WTB: LS1 Fbody T56 parts
Hey guys, I need the parts to convert my 1995 LT1 T56 to one that will mount to an LSx motor. Originally I was just going to bolt the trans to my stock motor, but I had a a problem because my motor is an old crate motor with a 2pc. rear main seal. I also have an LS motor I have been planning to build and put in, so I decided to just do it all together. From my understanding I will need:
1. LS bellhousing
2. LS front/mid plate
3. LS input shaft
4. LS flywheel/clutch/pressure plate/slave cylinder
I really want to take care of 1-3 before I get into #4.
Please let me know what you have.
Thanks,
Wes
1. LS bellhousing
2. LS front/mid plate
3. LS input shaft
4. LS flywheel/clutch/pressure plate/slave cylinder
I really want to take care of 1-3 before I get into #4.
Please let me know what you have.
Thanks,
Wes
#5
TECH Fanatic
iTrader: (23)
I might have numbers 2 and 3 in a week or two, not sure but if you don't find one by then feel free to pm me.
For number 4- an ls7 clutch, flywheel, slave etc etc is only $230 or so brand new from partsgeek, less if using a coupon or cash back site. LuK 04-905. Also on amazon, rockauto etc.
For number 4- an ls7 clutch, flywheel, slave etc etc is only $230 or so brand new from partsgeek, less if using a coupon or cash back site. LuK 04-905. Also on amazon, rockauto etc.