Emerald Phoenix

iTrader: (2)

I bought my car with a coil relocation kit already installed and although it did move the coils out of the way it has caused me nothing but trouble with routing wires and even finding affordable wires.

I want to prelocate my coils back onto the valve covers and cover them with carbon fiber manifold covers instead. For this though I need the origional hardware and brackets, as well as any info concerning how everything bolts up. I think I can find all the info I need by calling on some local LS1 owners for help.

Anyone recently relocate and still have your stock hardware? Are you willing to sell it?

Emerald Phoenix

iTrader: (2)

bump... Does anyone at least know what all I'll need? Will I need a harness?

Emerald Phoenix

iTrader: (2)

Bump TTT and anything else that will help.

Emerald Phoenix

iTrader: (2)

Alright, at this point I don't mind making some stuff. I just need to know how the stock coils sit in their stock location. Does anyone know where I can find a picture or somthing?

Wonderbread

iTrader: (51)

You can get the brackets from the dealer for like $20. I would just call them

Emerald Phoenix

iTrader: (2)

Thanks. Do you know if the relocation kit required an extension harness that I should remove? Are the brackets going to be all that I need?

Wonderbread

iTrader: (51)

You are going to need bolts, I believe they are M8, just get the brackets and go to you local parts store and get the size you need. You will need to tap the bolt holes on the brackets, for whatever reason they are not threaded when you buy them from the dealer.
Im not sure about the extension harness, youll have to look for yourself.

Hope that helps

Emerald Phoenix

iTrader: (2)

I am already on top of the bolts as I work at O'reilly Auto and have access to the thread sizing bits.

Thanks for your help.