NEED F-Body Parts
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: North Carolina
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
NEED F-Body Parts
I need the following:
Ebony t-top shades
Adjustable Torque Arm either UMI or BMR
pre bent lines for a line lock and directions for putting in a line lock
driveline specs for what the pinion angle should be on a 6-speed trans am with a 9inch rearend and 1-1/2 lowered supspension haha i know not too much to ask for right
Ebony t-top shades
Adjustable Torque Arm either UMI or BMR
pre bent lines for a line lock and directions for putting in a line lock
driveline specs for what the pinion angle should be on a 6-speed trans am with a 9inch rearend and 1-1/2 lowered supspension haha i know not too much to ask for right
#2
FormerVendor
iTrader: (15)
Join Date: Jun 2006
Location: Los Angeles, CA
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Replacement T-top Shades: http://store.specializedstainless.co.../Detail?no=199
Specialized Stainless
Specialized Stainless
#3
12 Second Club
iTrader: (2)
Parallel to transmission output. IE SAME angle on each u-joint. Anything else leads to short Ujoint life and driveshaft failure. You can take the angle off the trans with the car ON THE GROUND and as close to level as possible, and the torque arm attached to the trans tailshaft.