speedydog5

iTrader: (1)

let me know what you got looking for whole kit hopefully injectors and pump to but let me know what ya got

speedydog5

iTrader: (1)

bump

fenix999

iTrader: (17)

Not exactly what you wanted but probably even better for less money. I have a single front mount turbo kit for sale, COMPLETE bolt on kit. PM me for more info and details

fenix999

iTrader: (17)

If not i have a friend willing to sell his used procharger setup to you and buy my new turbo kit...so whatever floats your boat Pm me whenever you read this, thanks!

Rickys S/C Z28

iTrader: (13)

he is right ..... i have the kit pm me

speedydog5

iTrader: (1)

bump still looking

Mike Cordero

iTrader: (122)

This is D1SC Procharger set. I had been collecting parts for almost a year but get too high on the credit card so think I won't be able to finish my illussion. Some parts are used but low millage, others are brand new. You will only need the cheapest perts to complete the set up that are the fan shroud and fan unit from Procharger that you can get them from Bob at EPP; maybe a fe; but not shure, bolts and screws. Tune/program also. The kit is as follows:
1.D1SC unit with the J bracket and pulley (low millage).
2.Brand new set of all the hoses, tubing and clamps, Polished plenum and the up graded 4.5" twin intercoolers; also includes the air and horn rellocation brackets. 8 ribs set up (pulleys).
3.60# Mototron injectors (low millage).
4.Brand new GS340 fuel pump.
5.Brand new crank pinning kit.
6.ATI Super Damper (used; it has a lost piece at one of the ribs, about an inch, but the guy told me that never had problems with slippering belts). It cost about 450.00 new.
I live in Puerto Rico so the kit would be shipped by USPS (Parcel Post, with insuranace). I'm looking to recover at least 4,500.00. I will cover the shipping quotes via USPS. I accept pay pal but need to make an arrangement with this; they charge me about 3%. See my feedbacks here or on ebay (yellow69birds).
Thanks.

speedydog5

iTrader: (1)

still looking

Urban Legend

iTrader: (5)

I have this:
D1SC and plastic inlet hat with a 3.7 8 rib pulley less than 1000 miles on it
FMIC with all pipes, clamps, hoses
Vortech Mondo Bypass valve
SDCE set up, 8 rib
7.25 sdce 8 rib crank pulley
Bought the D1SC from exotic performance plus brand new back in late 07.
This set up can go to 15-16 pounds of boost depending on your set up.
All parts are still on the car.
$4200.00 plus shipping