PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

-100% LTFTs?

Thread Tools
 
Search this Thread
 
Old 10-13-2008, 08:29 PM
  #1  
11 Second Club
Thread Starter
iTrader: (3)
 
animuL's Avatar
 
Join Date: Dec 2005
Location: Wichita, KS
Posts: 224
Likes: 0
Received 0 Likes on 0 Posts

Default -100% LTFTs?

Just installed an MS3 cam and I get -100% LTFTs all the time. STFTs look great, car has basically a stock tune as far as all the fueling and spark goes. It does run and does idle.

Nevermind, reloaded the config file and its all good.

Last edited by animuL; 10-13-2008 at 08:46 PM.
Old 10-13-2008, 09:33 PM
  #2  
12 Second Club
iTrader: (10)
 
98redorangeta's Avatar
 
Join Date: Sep 2005
Location: From Ohio now in that state up north
Posts: 948
Received 0 Likes on 0 Posts

Default

you are probably logging to many pids cut the number of things your loggin down and see if that fixes it has happened to me on 98 cars with hp tuners.
Old 10-14-2008, 12:37 PM
  #3  
TECH Fanatic
iTrader: (1)
 
Engine_HP's Avatar
 
Join Date: Jun 2008
Location: Middle East.
Posts: 1,753
Likes: 0
Received 8 Likes on 6 Posts

Default

check ur fuel pressure
Old 10-14-2008, 12:52 PM
  #4  
LS1TECH Sponsor
iTrader: (2)
 
foff667's Avatar
 
Join Date: Jul 2003
Location: Clermont, FL
Posts: 7,986
Likes: 0
Received 3 Likes on 3 Posts

Default

Originally Posted by 98redorangeta
you are probably logging to many pids cut the number of things your loggin down and see if that fixes it has happened to me on 98 cars with hp tuners.
Yup, if you are logging over 24 bytes on a pcm that only supports up to 24 bytes the software will drop pid's to get you back down to the max and it usually starts with the LTFT's.

-Bill




All times are GMT -5. The time now is 10:04 PM.