jrp

iTrader: (16)

and finally pulled the codes and ran through the program. good lord thats a lot of info to wade through. this program rules though .

codes were:

p0134
p0140
p0155
p0160
p0300
p0405

and they repeat. also it apears as if im running lean as opposed to rich as i had thought.; 13.8-14.9 through out the rev range. im still going through the loads of data looking over things to try and see if i can pin point things that are wrong.

Fetumpsh

That value is the 'commanded' AFR from the PCM, it might be a different story at the tailpipe!!. You need to put a WB02 on it to see what it's really running, however, commanded 13.8 at WOT is way too lean indeed.