5_02ls1

iTrader: (20)

I went strictly by this thread https://ls1tech.com/forums/pcm-diagn...thout-eio.html

also confirmed it in a few other threads...

when i start everything up and start the scanner the a/f ratio i inserted on the table dissapears and says its not compatible with the operating system im using....

also if i try to insert the a/c psi sensor into the table i get the same thing ...im wanting to say the box that pops up says somthing about my system being,or not being 24bit...i may do a screen shot of what im getting later today......I tried to enter the egr into the table as well as the evap purge....same thing ...

Im not running any narrowbands so im thinking of wiring the wideband through one of them....

any help appreciated....

2manytoys

iTrader: (9)

You need to log the volts from the sensor theat you are outputting to from your wideband (a/c or EGR). You will have to remove something from the table to make room for it.

5_02ls1

iTrader: (20)

didnt know i had to remove an item off the table....i guess that makes sense....

5_02ls1

iTrader: (20)

got it working thru the a/c pressure sensor....now if i could come up with a pid to work with the fast wideband??????

shoemike

iTrader: (25)

F.A.S.T WBO2 should be
V*2.78+9.6

5_02ls1

iTrader: (20)

thanks...