PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Threw a AIR code.

Thread Tools
 
Search this Thread
 
Old 10-01-2009, 07:21 AM
  #1  
Internet Mechanic
Thread Starter
iTrader: (17)
 
BlackScreaminMachine's Avatar
 
Join Date: May 2005
Location: Wallingford CT
Posts: 9,831
Likes: 0
Received 2 Likes on 2 Posts

Default Threw a AIR code.

http://gearchatter.com/viewtopic9356...7d34ad73273c37

This is due to removing the Pump so I understand why. I had not before or short after the removal is wipe out the DTC codes with my scanner. I did it last night as I finally got around to it. I thought I had dead o2's but turns out they are fine.

My question as I put cycles on the car to get everything reset, with the pump removed but the distribution valve/block in the back still on and the lines ran to the header, do you think its likely the code will resurface?

I know there is a link about Drivecycles and what it takes to ready all the systems, if someone has that, can you please post it.

I have scannable emissions coming up and I just want everything perfect. Worse comes to worse, I can toss the pump back in and plug it in while I get it ready.

The MIL light did not illuminate on the 1st drive.
Old 10-01-2009, 08:10 AM
  #2  
LS1Tech Sponsor
 
06MonteSS's Avatar
 
Join Date: Dec 2005
Location: CT
Posts: 2,927
Likes: 0
Received 10 Likes on 10 Posts

Default

here ya go man....

http://obdii.com/drivecycle.html
__________________
06MonteSS / DiabLew Tune

2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
Old 10-01-2009, 08:22 AM
  #3  
Internet Mechanic
Thread Starter
iTrader: (17)
 
BlackScreaminMachine's Avatar
 
Join Date: May 2005
Location: Wallingford CT
Posts: 9,831
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by 06MonteSS
Perfect, thanks!
Old 10-02-2009, 07:38 AM
  #4  
Internet Mechanic
Thread Starter
iTrader: (17)
 
BlackScreaminMachine's Avatar
 
Join Date: May 2005
Location: Wallingford CT
Posts: 9,831
Likes: 0
Received 2 Likes on 2 Posts

Default

Not that it was not unexpected. AIR code came back, now I gotta dig for the pump so it can energize and I can get through emissions.




All times are GMT -5. The time now is 04:13 AM.