adding a screened maf
01-22-2010, 11:53 PM
#1
TECH Fanatic
Thread Starter
iTrader: (70)
Join Date: Oct 2005
Location: Los Angeles, California (818)
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
adding a screened maf i currently have a delphi85mm maf without the screen. i think it isnt working properly. will adding a delphi 85mm maf with a screen affect the tune?
01-24-2010, 11:28 AM
#3
TECH Regular
iTrader: (2)
Join Date: Nov 2001
Location: Mims, Florida
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
What he said, the screened MAF will change the fuel trims but still should remain within the PCMs range of adaptability, so no major issue. You might want to check the AFR at WOT on a chassis dyno. The PCM is very adaptable for the normal drive around stuff and get your back to 14.7:1 by changing the LTFTs. However, the PCM is much less adaptable at WOT.
01-29-2010, 06:21 AM
#4
Launching!
Join Date: Feb 2004
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
But that would only be if the Maf needs the airflow smoothed by the screen before entry.
Tune has adaptive learning. Can accept a lot more than just the addition or deletion of a screen.
