sputting under light load with lean spikes
06-22-2010, 08:34 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
sputting under light load with lean spikes where do i start just got it running with the 60lbs.....also afr are everwhere while driving.only tuned it for about an hour but just wanna get some ideas on where i have to work on.
will try to get my tune and maybe a data log up soon
setup
lq4 stock with a rear mount t70 running a 2 bar hptuner map with 60lb injectors
will try to get my tune and maybe a data log up soon
setup
lq4 stock with a rear mount t70 running a 2 bar hptuner map with 60lb injectors
06-23-2010, 08:28 AM
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
well i know i changed the size for the injectors because it wouldnt start before i did that. i guess ill get a log and let you guys that know look at it and give me some starting points
06-25-2010, 09:38 PM
#6
FormerVendor
iTrader: (9)
Join Date: May 2003
Location: Jacksonville, Fl
Posts: 1,573
Likes: 0
Received 0 Likes
on
0 Posts
I would say start with regular idle and drivability area fuel trims. Both sides reporting within +/-1% of each other-irregardless of the total error??? A high error on one side should lead you back to your most expensive sensor- your brain/fingertips/ears for exhaust leaks. No tune will fix this kind of descrepancy.
06-30-2010, 09:34 AM
#7
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
if i where to have an exhaust or intake leak wouldnt it never run right? it will run fine then start sputting. everyonce and a while it will through a mass air perfomance code i dont know if that has anything to do with it?
