Good place to send PCM for a base tune on a D1SC?
#1
Teching In
Thread Starter
iTrader: (11)
Join Date: Sep 2007
Location: Salina, Kansas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Good place to send PCM for a base tune on a D1SC?
Need to know what the best place is (or a reputable one) to send my PCM out for a base tune. I have a '00 TA, LS6 intake, .601/.610 cam (not sure on the duration, good lope, and I know it's mainly for NA), longtubes with full stainless exhaust, 60lb injectors, Racetronix with hotwire..put down 419/401 w/o injectors and pump. I'm finishing up my D1SC in the next couple weeks, want to send this out for a base tune. Located in Salina, KS. Still unsure of where I want to take it for the final tune, but want to be able to get it up on the trailer and have a good starting point when I get to the final dyno session. Going to be around 6-8 lbs of boost depending what I lose through the intercooler. Thanks guys, help is appreciated!
#2
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
Personally I'd want to own the ability to tune that
beast, starting from very conservative, rather than
hope for salvation by mail. And do a whole mess of
scanning before I decided to go all out on the rollers.
beast, starting from very conservative, rather than
hope for salvation by mail. And do a whole mess of
scanning before I decided to go all out on the rollers.
#4
Teching In
Thread Starter
iTrader: (11)
Join Date: Sep 2007
Location: Salina, Kansas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
That's the thing, I don't know who I want to do the final tuning. Gotta be somewhat reasonable distance. I have been buying some parts lately from House of Boost in KC, great guys to deal with, anyone have any dealings with them tune wise? What should I get to scan the car for first? Btw, Semper Fi brother.