SSilver

I have a generic ignition switch from Kragen that has 4 posts that read

BATT
IGN
ACC
START

my other wiring is done just like this (thanks Pocket)



I'm assuming...

-I need a 12 AWG wire from my battery to the BATT on the ignition switch

- 12 AWG (?) wire from the Starter to the START on the ignition switch

- 18 AWG wire from IGN to the Key 12v+

not sure what happens with the ACC or would that also go to the Key 12v+ on the relay to power up the relay in the ACC position as well?

thanks guys

Also does the ignition switch get grounded?

leon phelps

did you ever get an answer for this?

exactly at the same place.