PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Bog

Thread Tools
 
Search this Thread
 
Old 11-16-2010, 06:25 PM
  #1  
Launching!
Thread Starter
iTrader: (2)
 
6.0mustang's Avatar
 
Join Date: Dec 2008
Location: ATX
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
Default Bog

i've got an off idle bog. til about 2500 rpms. i have to feather the gas to that point. but as soon as i move the throttle it goes lean, and if i hold it long enough (2 seconds) it will pop through the intake.
i've gone through the fuel map and increased the fuel.... but i feel like i'm missing something. any help would be great.
Old 11-16-2010, 06:27 PM
  #2  
Launching!
Thread Starter
iTrader: (2)
 
6.0mustang's Avatar
 
Join Date: Dec 2008
Location: ATX
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
Default

is there anything i should change on the iac to componsate for the 90mm throttle body.... like close the throttle plate more and give it more steps on the iac or vise versa... didnt have this problem with my old motor and stock intake.
Old 01-27-2011, 12:28 AM
  #3  
Launching!
Thread Starter
iTrader: (2)
 
6.0mustang's Avatar
 
Join Date: Dec 2008
Location: ATX
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the help...... it was a bad injector driver




All times are GMT -5. The time now is 06:47 AM.