camarojokester

iTrader: (5)

Hi, I went out to drive my car today and all it does is crank. I tested it and Im not getting any spark or pulses, so I changed the crankshaft position sensor hoping that will do the trick and nothing. I checked all my fuses and relays and they turn out fine. It drove fine yesterday and today I have this. Could it be that my Pcm took a dump? Please Help.

camarojokester

iTrader: (5)

no one, I am thinking that maybe its the ECM

1lejohn

iTrader: (9)

Yea I would think the PCM or the wires and connector to the crank senser. How about the VATs?

camarojokester

iTrader: (5)

VATS is tuned out. I checked all the grounds. Ill recheck the Crank sensor connector later

Old Geezer

iTrader: (3)

Fuses???

NHRA4MULA

iTrader: (29)

check the ing relay under the hood switch it with the ac this happend to a friend of mine and the dealer had a hard time finding it

babbage1109

iTrader: (11)

Ignition/starter relays. Check em. The fans take the same kind. Just swap them and see what happens. It's happened to me before

robbyredneck

iTrader: (1)

do you have fuel pressure?

blackenedss

I am having the same exact problem... My ignition relay keeps blowing and I'm not sure why. I narrowed it down to that at least. Also, are the AutoZone brand relays ****?

Should I use OMRONS?

Best,

Julian
Dallas, TX