CRAWLIN

iTrader: (6)

What do I need to set the parameters to for emissions? I have o2 heater codes setting and I want to fix this so I can pass emissions OBD2 test. Which do I turn off and still have the test to complete and allow me to pass emissions. It allows you to adjust if the error sets (on/off) and Error Mode (off/MIL on 1st/MIL on 2nd/No MIL light). Which should I change to what?

Thanks,
Tony

felton316

I have mine set on 'set SES= On', and 'Error mode=Type X'. It allows the readiness test to be completed.

RPM WS6

iTrader: (3)

That is exactly right. Or, if you have an older version of Edit (like me) you need to set the 'test' to "on" and the MIL/SES to type X. Same thing as above, the screen just looks a little different for different versions.

Main thing to remember is, if the option is a toggle for "on/off" only, always pick "on". If the option allows you to scroll between Type A, B, C, or X, always pick X to keep the SES light off.

CRAWLIN

iTrader: (6)

Thanks alot...appreciate it....!!!!


Tony