LTFTs question
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Jul 2004
Location: GA
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
LTFTs question
I have SD tune on my blown, H/C 98. After tuning the VE table, I turned off the LTFTs (by recommendation of two GREAT tuners on the forum)
My question is, now when I data log, one bank shows, -100,the other 0, and the histogram indicates a -50 in the cells. Even my STFTs seem to be back off again, when I had them down in the 0-1 range.
Do I need to just start over again, or is there somthing I'm overlooking?
Note; car runs smooth as silk at part throttle and WOT is pretty close, although I do keep it VERY rich with Alky.
My question is, now when I data log, one bank shows, -100,the other 0, and the histogram indicates a -50 in the cells. Even my STFTs seem to be back off again, when I had them down in the 0-1 range.
Do I need to just start over again, or is there somthing I'm overlooking?
Note; car runs smooth as silk at part throttle and WOT is pretty close, although I do keep it VERY rich with Alky.