Wideband sensor placement for stock manifold...best spot?
07-12-2011, 04:04 AM
#1
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jun 2004
Location: Ft. Irwin, California (But Virginia is home)
Posts: 1,501
Likes: 0
Received 7 Likes
on
1 Post
Wideband sensor placement for stock manifold...best spot? Title sums this up. Currently running LTs and have the AEM wideband sensor in the passenger collector. Due to the retardly stringent German noise laws I'm having to reinstall the stock manifolds to quiet the car down (or it won't pass inspection).
That said, where is the best spot to place the sensor? I can't drill into the manifold itself but placing in the y-pipe will be AFTER the front cats.
Need this done so I can retune the car once i place the crappy stock manifolds back on. Car is a H/C car..so it's not going to like this change too much.
$0.02 appreciated.
That said, where is the best spot to place the sensor? I can't drill into the manifold itself but placing in the y-pipe will be AFTER the front cats.
Need this done so I can retune the car once i place the crappy stock manifolds back on. Car is a H/C car..so it's not going to like this change too much.
$0.02 appreciated.
07-12-2011, 11:34 AM
#3
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jun 2004
Location: Ft. Irwin, California (But Virginia is home)
Posts: 1,501
Likes: 0
Received 7 Likes
on
1 Post
BTW, is that passenger or driver side? (I'm sitting in a tent in Afghanistan right now, so I can't look at the Y-pipe to see which side has more clearance.... ) 
