PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

5.3 timing drop to -10 on accelration

Thread Tools
 
Search this Thread
 
Old 10-01-2011, 12:15 AM
  #1  
Teching In
Thread Starter
 
5.3waggy's Avatar
 
Join Date: Feb 2010
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default 5.3 timing drop to -10 on accelration

I have a l59 5.3 in my 1983 jeep. about half the time under hard acceleration it will fall on its face for a second then pick up and go again. A friend logged it on hpt for me and its dropping timing to -10 and then pics back up. I don't have hpt and he is busy. Can someone look at this log and help me figure it out? the log is around 20mins and it happend 4 times during the drive. sorry we didn't mark when it does it but its not hard to find. also pay no attention to the wide band as it is setup for my friends car not mine. Thanks. also attached it my tune, stock accept for the necessary things to make it run.
Attached Files
File Type: hpl
Timing cutout.hpl (396.4 KB, 98 views)
File Type: hpt
5.3 waggytune.hpt (471.7 KB, 101 views)
Old 10-01-2011, 07:36 AM
  #2  
TECH Senior Member
iTrader: (3)
 
Old Geezer's Avatar
 
Join Date: Jun 2004
Location: GA, USA
Posts: 5,640
Received 70 Likes on 62 Posts

Default

False knock?

Hook up the wb. Will help w/ the diagnosis and tuning.....
Old 10-01-2011, 11:56 AM
  #3  
Teching In
Thread Starter
 
5.3waggy's Avatar
 
Join Date: Feb 2010
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

there is a wide band in the jeep just not hooked to hpt. its reading correctly. no knock retard on the log.
Old 10-01-2011, 05:26 PM
  #4  
9 Second Club
iTrader: (2)
 
BLK02WS6's Avatar
 
Join Date: Jul 2002
Location: on the dyno tuning in MD
Posts: 2,583
Likes: 0
Received 1 Like on 1 Post

Default

I don't have HPTuners anymore, so I can't look at the tune or log... might want to make sure he zeroed out the Traction Control spark retard tables - I have seen that do what you are describing when transplanted into a vehicle with no traction control.
Old 10-04-2011, 11:26 AM
  #5  
2TR
On The Tree
 
2TR's Avatar
 
Join Date: Apr 2011
Posts: 181
Likes: 0
Received 1 Like on 1 Post
Default

Need to remind Hp Tuners users that to view your file they need to be using the 2.23 beta software. Otherwise they will get junk data in the scanner and the tune will not be viewable.
Old 10-06-2011, 10:24 PM
  #6  
Teching In
Thread Starter
 
5.3waggy's Avatar
 
Join Date: Feb 2010
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

looks like it was abuse mode issue. I think its fixed now.




All times are GMT -5. The time now is 09:27 PM.