PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

need help

Old 10-05-2011, 11:23 PM
  #1  
Launching!
Thread Starter
iTrader: (7)
 
fatboyzcamaro's Avatar
 
Join Date: Sep 2008
Location: MARYLAND
Posts: 230
Likes: 0
Received 0 Likes on 0 Posts
Default need help

got a few question i hope someone can help me with please.......

finially started my car after all of these mods.ported intake ls6,bigger injectors(42),electric wp,changed from stick to t400,aftermarket fuel system,4gal cell,aftermarket fuel rails,nitrous plate,truck maf(85mm),and altenator only on front off engine.when i first started the car it fired right up pow and idle.not running clear but running.i had like three vacum leaks now car wont idle and i got to play with it to get it going.dont sound clear like its seem real rich.is my tune that far off.which i dont know what tune it has if any.cam only(g5x2) car with all mods.

dose these maf need calibrated like mustangs.dont know just asking.

my buudy was suppose to tune it but im press for time as we speak.so im might just take to local shop that tunes n area.

just wanted to c if i had anything out of wack before i get tune.

any help or suggestion will b appreciated.lstech has help and build this car with me and im excited to get it going.didnt come out bad so far.thanks everyone.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:42 PM.