Maf
#1
Maf
Hope to start building my intake system soon( air cleaner to tb), is there a prefered position for the MAF, close to the tb ?, in a straight section? The engine is an 05 vette, I believe the maf was directly in front of the tb, but I acquired this project unassembled so will not be sure until I check out a 05 manual.
Thanks in advance
Thanks in advance
#3
Don't put it near a bend, try to have a nice clean straight tube (before and after several inches)
Which MAF you using, I'd recommend a screen before it as well, smooths airflow (Hz reading) seen this first hand.
Which MAF you using, I'd recommend a screen before it as well, smooths airflow (Hz reading) seen this first hand.
#4
TECH Addict
iTrader: (2)
To answer your question, the MAF should be near the end of the longest straight section of intake track you have. This allows air to flow through it in a linear fashion which will give the most accurate and consistent results. If you notice where the OEM's place them you will see what I mean. The MAF is rarely coming off a bend and if it does the bend is as gradual as possible.
Post some pictures of your project in the conversions section, we'd love to see it.