PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

lean condition on take off, help please

Thread Tools
 
Search this Thread
 
Old 07-05-2012, 08:46 PM
  #1  
TECH Apprentice
Thread Starter
 
35th camaro's Avatar
 
Join Date: Aug 2009
Location: NB Canada
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default lean condition on take off, help please

i have been having issue's with my car when i leave a stop light, it will pop in intake and bog then pick-up , i look at my a/f meter and goes to 16. i have tried adding fuel at that point of air flow and has had no change, is there another setting with hp tuner that i can add fuel as i touch the trottle? any help would be apreciated, thanks. 402 with 236-242 cam and fast 102 intake and t/b with 100mm maf.
Old 07-05-2012, 08:49 PM
  #2  
TECH Apprentice
Thread Starter
 
35th camaro's Avatar
 
Join Date: Aug 2009
Location: NB Canada
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default

my wot a/f ratio is aprox 12.5 average accross the full rpm range, only on the initial touche of the accelerator pedal does it go lean.
Old 07-05-2012, 08:51 PM
  #3  
10 Second Club
iTrader: (3)
 
MontecarloDrag's Avatar
 
Join Date: Aug 2005
Posts: 889
Likes: 0
Received 4 Likes on 4 Posts

Default

Set it to full open loop, disable all trims.
Then open the scanner and reset fuel trims

Test to see if it does the same




All times are GMT -5. The time now is 01:09 AM.