PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

some tips for me to start tuning

Old 07-15-2012, 09:59 PM
  #1  
TECH Apprentice
Thread Starter
iTrader: (5)
 
SStressin's Avatar
 
Join Date: Jun 2012
Location: Long Island
Posts: 361
Likes: 0
Received 2 Likes on 2 Posts

Default some tips for me to start tuning

so my hp tuners is own the way and just want to get some tips and pointers on where to start... i bought the massport book but want some advice from ls1tech too before i start! lil info on the car m6 2000 ss camaro 4.30s 9 inch..car has a innovate wideband in it

ls6 bored/stroked to 383
trickflow cnc225s then hand ported
the new fast 92 ported and nw 92 throttle body
fast toys 98mm lid
gm 85mm maf
ram air
tsp 1 7/8 lts and ory/cutout
eps custom 240/256 .647/.647 111lsa
asp underdrive pulley
42lb racetronix injectors/speed inc rails/racetronix pump and hotwire kit

pretty sure i listed everything.. if you need to no more just ask and il post up.. where do you guys think i should start and work my way through? car already has a base tune from my old 383 setup which is pretty much the same but idt the tuner was that good.. first i want to get this setup dialed in then advance the timing and throw some 110 octane in bc i have a close pump that has it. then spray it get that tune dialed in then get the 110 octance dialed in for the spray.. so if i have a certain race i could just upload the tune
Old 07-16-2012, 05:41 AM
  #2  
TECH Junkie
iTrader: (18)
 
LS1MCSS's Avatar
 
Join Date: Jan 2006
Location: Dover, Arkansas
Posts: 3,831
Likes: 0
Received 7 Likes on 7 Posts

Default

You need to read the stickies. You'll find a lot of good info in them.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:03 AM.