NOTAV6

iTrader: (3)

My v6 to LS1 swap was thought to be complete until....

The headlight wiring harness was missing from the harness I'd previously purchased.

The engine is an 00' LS1 and I'm told this harness should have a purple wire with orange connectors.

I'll be posting in the parts wanted thread but thought someone here might be of help or know someone who would be. It's somewhat of a desperate situation--the brakes in my old truck are completely shot and the shop where my Camaro is parked wants to move the car very soon.

Any help would be greatly appreciated.

Brett

Magnus

iTrader: (4)

use your stock underhood harness and body harnesses, just modify the PCM harness of the LS1 to match up with your body harnesses, imho thats the easiest way.

I have a lot of information on my website regarding this swap.

http://www.dxsoftware.com/magnus/

NOTAV6

iTrader: (3)

Thanks for the info, I'll pass it on the guys working on my car. They seem convinced that I must get this harness.

Brett

Magnus

iTrader: (4)

You just need to rewire your engine harness.. some wires need to be switched, some added, some removed.. etc. etc..

NOTAV6

iTrader: (3)

Pm'd you Magnus