PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Troubleshooting p0133

Thread Tools
 
Search this Thread
 
Old 12-28-2012, 12:16 AM
  #1  
Staging Lane
Thread Starter
iTrader: (2)
 
907chev's Avatar
 
Join Date: Jan 2012
Location: Anchorage, AK
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default Troubleshooting p0133

Hey, after installing headers and getting a tune I had this could come up.(Low response bank 1, sensor 1) I have replaced all sensors. I fixed an exhaust leak on bank 2. I have a small exhaust leak at my y pipe but that shouldn't effect it right? Any ideas how to go about troubleshooting this? Thanks!
Old 12-28-2012, 10:47 AM
  #2  
TECH Resident
iTrader: (1)
 
Russ K's Avatar
 
Join Date: Apr 2006
Location: Regina, Sask
Posts: 809
Received 4 Likes on 3 Posts

Default

It is normal to have low response & insufficient codes when long tube headers are installed. Just set those codes to no error reported & uncheck the SES boxes.

Russ Kemp
Old 12-28-2012, 01:01 PM
  #3  
Staging Lane
Thread Starter
iTrader: (2)
 
907chev's Avatar
 
Join Date: Jan 2012
Location: Anchorage, AK
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Russ K
It is normal to have low response & insufficient codes when long tube headers are installed. Just set those codes to no error reported & uncheck the SES boxes.

Russ Kemp
Would I have the person tuning do that for me, right? This will prevent the engine from going into closed loop too?

Thanks
Old 12-28-2012, 03:20 PM
  #4  
TECH Resident
iTrader: (1)
 
Russ K's Avatar
 
Join Date: Apr 2006
Location: Regina, Sask
Posts: 809
Received 4 Likes on 3 Posts

Default

No, it will still go into closed loop with those codes disabled.

Russ Kemp
Old 12-28-2012, 04:48 PM
  #5  
Launching!
 
leon phelps's Avatar
 
Join Date: Nov 2009
Location: Croydon, PA
Posts: 274
Likes: 0
Received 1 Like on 1 Post

Default

get your engine street tuned.

your headers and fuel trim are out of whack.

the tune will get the engine running right and get rid of the error the right way.

ask me how I found this out...basically you are pouring fuel into the engine too long and getting a backfire in the exhaust.
Old 01-07-2013, 03:26 AM
  #6  
Staging Lane
Thread Starter
iTrader: (2)
 
907chev's Avatar
 
Join Date: Jan 2012
Location: Anchorage, AK
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Russ K
No, it will still go into closed loop with those codes disabled.

Russ Kemp
Sorry, I meant OPEN loop I got those two mixed up.
Now I have a p1133.
Originally Posted by leon phelps
get your engine street tuned.

your headers and fuel trim are out of whack.

the tune will get the engine running right and get rid of the error the right way.

ask me how I found this out...basically you are pouring fuel into the engine too long and getting a backfire in the exhaust.
I am street tuned and I know this about the trims.
Old 01-07-2013, 10:57 AM
  #7  
LS1Tech Sponsor
 
06MonteSS's Avatar
 
Join Date: Dec 2005
Location: CT
Posts: 2,927
Likes: 0
Received 10 Likes on 10 Posts

Default

you need to disable/set to no error reported the codes 0133, 0153, 1133, and 1153 for long tube headers...
__________________
06MonteSS / DiabLew Tune

2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com



Quick Reply: Troubleshooting p0133



All times are GMT -5. The time now is 08:19 PM.