VE table question
05-13-2013, 07:37 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
VE table question Yea my first time logging fuel I unplugged the maf and copied the spark table loaded the tune in my car reset the fuel triims when I took it out for a ride it shifted real hard does this put the tranny in a default mode to not worried about it just curious if this is whats happening
05-13-2013, 07:54 PM
#2
9 Second Club
iTrader: (2)
Join Date: Jul 2002
Location: on the dyno tuning in MD
Posts: 2,583
Likes: 0
Received 1 Like
on
1 Post
Yes, it is happening because you are in speed density...
Set the Transmission Diagnostics->Transmission DTC Fault Max Pressure Enablers
• P0101 ‘No’
• P0102 ‘No’
• P0103 ‘No’
Set the Transmission Diagnostics->Transmission Failsafe Enablers:
• Set all airflow related enablers to ‘No’ to prevent the transmission from going into failsafe mode due to the MAF being disabled.
Set the Transmission Diagnostics->Transmission DTC Fault Max Pressure Enablers
• P0101 ‘No’
• P0102 ‘No’
• P0103 ‘No’
Set the Transmission Diagnostics->Transmission Failsafe Enablers:
• Set all airflow related enablers to ‘No’ to prevent the transmission from going into failsafe mode due to the MAF being disabled.
