Mustang Dyno only 340 bolt on cam only z28. Need opinions!
#1
Teching In
Thread Starter
Join Date: Feb 2014
Location: Bridgeton, NJ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Mustang Dyno only 340 bolt on cam only z28. Need opinions!
I had my 99 z28 cam only car on the dyno today and only made 340 hp . I have a 224/224 598/598 110 lsa cam, hooker longtubes, ory, borla catback, Richmond 373s, ptc 3600 stall, ls6 intake, and a ported throttle body. Does this sound low even being on mustang dyno?
#2
Nope, my A4 '02 WS6 with a 212/216/ ~.600 cam, Fast intake, 85mm maf, 95 mm tb & shorties with an ORY and SLP exhaust put down 330 on a Mustang.
You may be lacking 10 hp or so but every dyno is a bit different. Without a baseline it's hard to say. Mine went from 292 to 330 with the cam.
You may be lacking 10 hp or so but every dyno is a bit different. Without a baseline it's hard to say. Mine went from 292 to 330 with the cam.
#3
Launching!
iTrader: (3)
Join Date: Apr 2004
Location: Greenville, SC
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
That # sounds on par. With a mustang dyno for my 228r cam A4 ws6 with all bolt on mods... I pulled 345rwhp.
Then 10 years later with no real changes to the car just miles and track time aging her... on a dynojet I got 365 rwhp. As I understand it a mustang dyno tends to run lower by 8-10% but that varies by who you talk to.
Then 10 years later with no real changes to the car just miles and track time aging her... on a dynojet I got 365 rwhp. As I understand it a mustang dyno tends to run lower by 8-10% but that varies by who you talk to.
Last edited by 666ws6; 03-01-2014 at 05:58 AM.