Gauge issues, speedo reads as tach
03-14-2014, 05:23 PM
#1
Registered User
Thread Starter
iTrader: (10)
Join Date: Apr 2009
Location: Oviedo Fl
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Gauge issues, speedo reads as tach I was running a off brand harness before it burned up, during that time all the gauges functioned as they should.
Got my new harness in, soldered the necessary connections, however now my speedometer moves in unison with the tachometer.
I checked the ohms between both gauges signal wires, no continuities.
Using HP tuners and the live data feed, at park it thinks the truck is moving..
The place who made this harness is currently closed so I can't call them, any other suggestions to check before I yank the whole thing out again.
This is a standalone harness, and autometer gauges.
Got my new harness in, soldered the necessary connections, however now my speedometer moves in unison with the tachometer.
I checked the ohms between both gauges signal wires, no continuities.
Using HP tuners and the live data feed, at park it thinks the truck is moving..
The place who made this harness is currently closed so I can't call them, any other suggestions to check before I yank the whole thing out again.
This is a standalone harness, and autometer gauges.
