95_lq4_z28

I have a 95 camaro z28. With a 5.3. I have 28lb injectors in it with a ls2 ported intake,90mm endelbrock tb, and longtubes. With the 28lb injector data the car won't run. With 100 lb injector data it will idle but won't rev above 2500. Running super rich. I have stock lt1 fuel pump and lines also. Any help would be appreciated. I would really like to drive this thing.

2xLS1

iTrader: (25)

What FP regulator are you using? What is your FP at the rails? If those are 28lb injectors from either a 98 or 01-04 LS1 then they are rated that size at 58 psi. And why would you even attempt to run 28lb injectors with 100lb injector data?

95_lq4_z28

Using the corvette regulator from speedway. It's 58 lbs on my gauge. We tried different datas that's the only table that let's It run.

95_lq4_z28

Injectors are from 01 z06

2xLS1

iTrader: (25)

So you converted the 95 return fuel system to a returnless. Post the tune.

95_lq4_z28

I have the 95 two lines to the regulator which converts it to one line. Then that goes to the rail. Is that returnless?

95_lq4_z28

And I have a tune from a 2004 5.3 on it and it is a 2001 5.3 does that matter? Working on posing the exact tune right now.

95_lq4_z28

dyl camaro tune 6-29-14.hpt

95_lq4_z28

let me know if you guys can see the tune I have never posted one before so not sure if I did it right.

95_lq4_z28

Bump......

95_lq4_z28

Nobody has any clues needing help

95_lq4_z28

Nobody has any clues? Needing help

LSX Power Tuning

iTrader: (4)

Why is the tune for a 3 bar SD 6.0?