24x Conversion - MAP Issue tuning
12-11-2014, 04:00 PM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
24x Conversion - MAP Issue tuning Ok, So I was tuning for a couple hours this morning and his is the issues:
1. KPA is showing around 90 and the car seems to want too idle up when coming to a stop to around 1500 rpms and holds that idle alot of times under slow acceleration.
2. Under throttle over 2k rpms it wants to let out a muffle backfire so im assuming there is something going on with this MAP sensor.
3. Tried deleting the massair and going speed density but car just bucks and surges....There has to be something going on with this MAP sensor.
Is ther stock green connector Mass air not right for the 24x conversion? Or possibly not reading right?
Thanks!
1. KPA is showing around 90 and the car seems to want too idle up when coming to a stop to around 1500 rpms and holds that idle alot of times under slow acceleration.
2. Under throttle over 2k rpms it wants to let out a muffle backfire so im assuming there is something going on with this MAP sensor.
3. Tried deleting the massair and going speed density but car just bucks and surges....There has to be something going on with this MAP sensor.
Is ther stock green connector Mass air not right for the 24x conversion? Or possibly not reading right?
Thanks!
