Narrowband emulation connection
01-02-2015, 11:10 PM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Feb 2009
Location: Chino Hills, CA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Narrowband emulation connection I am putting an Innovative MTX-L wideband gauge in my car. I have searched for hours looking for an answer. I have found a lot of threads with a lot of information but the one piece of info that is constantly left out is, which HO2S wire do I hook the 0-1v output to. The low signal or the high signal, and does the other signal wire need to be connected to anything.
Thanks in advance
Thanks in advance
01-05-2015, 04:50 AM
#2
TECH Senior Member
I am putting an Innovative MTX-L wideband gauge in my car. I have searched for hours looking for an answer. I have found a lot of threads with a lot of information but the one piece of info that is constantly left out is, which HO2S wire do I hook the 0-1v output to. The low signal or the high signal, and does the other signal wire need to be connected to anything.
Thanks in advance
Thanks in advance
( the Low signal has to be connected to the MTX's ground )