onesloGTO

iTrader: (2)

I know this has been asked a million times but when searching I couldn't find the answer I wanted.

I need to get the wideband to read on my logs on hp tuners. Need to know how to wire up the green connector on the hp tuners box.

Thanks

onesloGTO

iTrader: (2)

I have the lc 1 wideband with a dyno tune gauge.

onesloGTO

iTrader: (2)

Does anyone happen to have the adapter cables and software for programming the innovate lc1 wideband that I could borrow?

I purchased the car about a month ago and the wideband was already in the car. But it's programed for e85. I need to program it for 91.

If not I guess I'm just going to have to buy a new wideband.

Thanks

BBC632Camaro

iTrader: (82)

I don't have an lc1 but you should be able to just hook up the wire to your hptuners in the 1 and 5 spot with the 5 spot being the ground. The 1 spot will go to whatever color your wire is for datalogging on your lc1. There are threads everywhere on the topic for those widebands

onesloGTO

iTrader: (2)

Why does it need to be grounded?

Hawn98Z28

iTrader: (1)

I have the lc1 but without the green wire but the green wire should be grounded with the blue and white wires. Brown wire to your mpvi # 1 slot.

onesloGTO

iTrader: (2)

Does the mvpi box need a ground as well?