PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

5.3 swap with manual trans. wont rev hi code p1860

Thread Tools
 
Search this Thread
 
Old 03-21-2015, 04:32 PM
  #1  
Teching In
Thread Starter
 
e30lsx's Avatar
 
Join Date: Dec 2013
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default 5.3 swap with manual trans. wont rev hi code p1860

just got my bmw 5.3 with manual trans running. it has cam ls1 intake and so on. car idles great. if just tap the throttle a little it revs up a bit, but wont rev very high. if you ease into it might get 4g out of it. hooked my scanner up and got codes p0650 and p1860. seems odd since i don't have automatic trans and pcm was tuned but can it be possible they didn't set up for manual trans? or do i need to put power or a ground to another wire off the pcm to fool it? cant think of anything else.... any help would be appreciated!


jeremy
Old 03-22-2015, 11:16 AM
  #2  
Teching In
Thread Starter
 
e30lsx's Avatar
 
Join Date: Dec 2013
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

hooked up fuel pressure tester has about 15-20 psi have to order pump tomorrow.
Old 03-27-2015, 11:16 AM
  #3  
TECH Addict
 
gagliano7's Avatar
 
Join Date: Aug 2005
Location: Monroe,NY
Posts: 2,258
Likes: 0
Received 112 Likes on 89 Posts

Default

Originally Posted by e30lsx
hooked up fuel pressure tester has about 15-20 psi have to order pump tomorrow.
I don't know what vehicle this is in but I had a similar problem and the hose came loose on my pump in the tank. Fixed my hose with a better clamp and I have been good ever since.



Quick Reply: 5.3 swap with manual trans. wont rev hi code p1860



All times are GMT -5. The time now is 09:26 AM.