Nicelysedate

iTrader: (3)

I will preface this with I am a novice and am following a guide trying to dial my VE table in. I have recently installed a cam (.588/.595 228/232 113 LSA) and am trying to dial in the tune for it. I have forced closed loop and unplugged the MAF and in my idle range I have pulled the table all the way down to 12. I have been able to zero out most of the other parts of the VE AFR correction table but i can't see, to affect 1200 and under. It stays almost a constant 12.6 afr. Am I missing a setting I need to disable?

LSX Power Tuning

iTrader: (4)

Do you have correct injector data? If you have the MAF unplugged then the VE table is doing your fueling forsure.

Nicelysedate

iTrader: (3)

Stock Injectors. Those tables havent been touched

Nicelysedate

iTrader: (3)

I havent touched the secondary VE table yet. Could that be my problem?

Nicelysedate

iTrader: (3)

Yep. I'm a dangerous idiot. Secondary drives SD tuning. I just read that too.

LSX Power Tuning

iTrader: (4)

Yeah if in SD and you have a secondary VE it will use that. I normally upgrade to a 2002 OS so it doesnt have a secondary ve and has a full ve table in SD.

kinglt-1

iTrader: (26)

I am so glad I only have to deal with 1 VE table.