Swapping to a 4l80e, how to i know what my tune is set up for?
03-02-2016, 09:37 PM
#1
Teching In
Thread Starter
Join Date: Mar 2016
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Swapping to a 4l80e, how to i know what my tune is set up for? HI, im swapping out a non electronic tranny for a 4l80e. I have a plug and play harness that will plug right into the 4l80e. My question is I have auto tranny tables in my HP Tuners, but can't figure out if its an 80e or 60e so don't know if i need a segment swap or not? My tranny ID is 9358180 CVN is 10e7 and Tranny Diagnostic 16264340 CVN is D026. Any help is greatly appreciated, just trying to save the two credits to do a segment swap if my tune already has it.
03-03-2016, 12:22 AM
#2
Teching In
Thread Starter
Join Date: Mar 2016
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I think I just answered my own question. Decided to see if I could find the same OS as mine which had to match the original as well as the Custom 3BAR. Luckly found one over at sloppy mechanics and went through the segment swap process in HPT and the Tranny ID and Tranny Diagnostic ID were exactly the same. So I must have a 4L80e
