Accelerator Pedal Options, E40 ECM LS2
#1
Accelerator Pedal Options, E40 ECM LS2
I'm currently building a '73 Camaro with an '06 GTO LS2/T56 Combo using an altered factory harness. My swap setup didn't come with the pedal or the pedal harness and instead of trying to track down the rare and expensive GTO pedal I wanted to look at other options. Looking through diagrams it appears most of this era ('04-07) vehicles use a 6 wire pedal; will any of these work, does it have to be that year GTO or can it only be vehicles using the E40? I've got the assembly out of an '06 Denali that would work perfect sizing wise I just don't know if the electrical will work! I did search and didn't find any specific info!
#2
This pedal will work from a Corvette. We can pin the connector properly for your ECM and provide you a pigtail if you would like. Vette Pedal
Contact me via email or call the shop at 765-378-4908 for pricing of pedal with pigtail or any questions you have regarding the pedal.
I'm not 100% sure but I don't think the truck pedal you have will work. On the E40 setups I don't remember ever having to set a truck pedal up so I can't say for certain on that one!
-Justin
Contact me via email or call the shop at 765-378-4908 for pricing of pedal with pigtail or any questions you have regarding the pedal.
I'm not 100% sure but I don't think the truck pedal you have will work. On the E40 setups I don't remember ever having to set a truck pedal up so I can't say for certain on that one!
-Justin
Last edited by jcvett56; 09-16-2016 at 11:42 AM. Reason: I didn't actually answer his question the first time!
#5
Well thats a deal if i ever saw one! Only thing holding me back is if or when the pedal goes bad it may be next to impossible to find another gto one. I keep leaning towards the c6 vette pedal. I may pm you. I have to sell some parts real quick.