What map value denote
06-21-2004, 11:38 AM
#2
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
WOT threshold shows as 94% TPS, this is a value box
you can change in HPTuners.
PE threshold on my car is set to MAP=15kPa stock.
That's a pretty low threshold to start enriching(?).
It does not discriminate WOT per se. There are PE
modifiers for other things, that I haven't gotten to
understanding yet.
I would like to build a model that combines all of the
"enrichment actors" and lets you see the true
enrichment response (between open loop A/F, the
various PE tables / modifiers, etc.) across the RPM,
MAP, TPS, MAF inputs. It seems conceptually messy
to me right now. Like PE vs RPM, without comprehending
MAP, seems like a pretty misguided enrichment basis
what with MAP or CylAir being the key burn rate
factor.
you can change in HPTuners.
PE threshold on my car is set to MAP=15kPa stock.
That's a pretty low threshold to start enriching(?).
It does not discriminate WOT per se. There are PE
modifiers for other things, that I haven't gotten to
understanding yet.
I would like to build a model that combines all of the
"enrichment actors" and lets you see the true
enrichment response (between open loop A/F, the
various PE tables / modifiers, etc.) across the RPM,
MAP, TPS, MAF inputs. It seems conceptually messy
to me right now. Like PE vs RPM, without comprehending
MAP, seems like a pretty misguided enrichment basis
what with MAP or CylAir being the key burn rate
factor.
06-21-2004, 04:46 PM
#3
Originally Posted by HumpinSS
the beginning of WOT
WOT, as jimmy says, anytime above 15kpa. Look at the WOT/Cold table - defined as TPS percent and RPM.
Here's an interesting thread with some good info on WOT http://www.efilive.com/forum/viewtop...er=asc&start=0 FWIW. How's the Monster cam??
joel
06-21-2004, 06:57 PM
#4
FormerVendor
Thread Starter
iTrader: (1)
Join Date: Feb 2002
Location: Waldorf, MD
Posts: 3,059
Likes: 0
Received 0 Likes
on
0 Posts
The monster cam is killing my *** trying to tune 
but i will prevail and work this out. I broke donw and bought HPTuners because of lost PCMs so I wont be tuning till i get it
but i will prevail and work this out. I broke donw and bought HPTuners because of lost PCMs so I wont be tuning till i get it
06-21-2004, 07:47 PM
#5
Originally Posted by HumpinSS
The monster cam is killing my *** trying to tune
, started the new VE table between Christmas and New Years '04. Thank God for NoGo ( He is The MAN!). I'm sure you will progress quickly with HP Tuners
. Keep me posted.joel
06-21-2004, 07:56 PM
#6
FormerVendor
Thread Starter
iTrader: (1)
Join Date: Feb 2002
Location: Waldorf, MD
Posts: 3,059
Likes: 0
Received 0 Likes
on
0 Posts
I was trying to wait for Efilive Flash scan but couldnt hold out. I guess i will have a damn good compro since i haves tested tow of the three so far