Any tuners want to take a peek at my file?
07-23-2017, 07:13 PM
#1
Teching In
Thread Starter
Join Date: Mar 2016
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Any tuners want to take a peek at my file? I pulled the turbo off and went with a Vortech v2 YSI blower. May see 10-15 psi max. I more need a tune to get it to the dyno and dial it in. If its close Id sure love it!
HP Tuners
Speed Density
LY6 6.0 (Rectangle port head motor)
ls3 intake 92mm cable T body
BTR stage 2 turbo cam (may change to one of his Blower cams)
80# Fast injectors
Truck has a Glide with a 3800 Converter if that matters
HP Tuners
Speed Density
LY6 6.0 (Rectangle port head motor)
ls3 intake 92mm cable T body
BTR stage 2 turbo cam (may change to one of his Blower cams)
80# Fast injectors
Truck has a Glide with a 3800 Converter if that matters
07-23-2017, 10:44 PM
#2
was car tuned properly for the turbo before the blower swap?
Was the only change turbo to blower?
If so, there is not much anyone can do remotely to your tune unless they had your exact setup and could share their tune.
youll have to drive it and see if its runs well enough to drive to the dyno.
I would avoid boosting it at all.
your spark table looks familiar, was this from a dyno tune or copied from another tune on the net?
Was the only change turbo to blower?
If so, there is not much anyone can do remotely to your tune unless they had your exact setup and could share their tune.
youll have to drive it and see if its runs well enough to drive to the dyno.
I would avoid boosting it at all.
your spark table looks familiar, was this from a dyno tune or copied from another tune on the net?
07-24-2017, 06:12 AM
#3
Teching In
Thread Starter
Join Date: Mar 2016
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
I copied the tables off of a similar setup off of the Tune Repository and never got it tuned. I started to go go turbo and decided to go supercharged. Never has been tuned. It was a Denmah tune I believe off of his truck.