Please Help Me, Guys
11-05-2004, 03:19 PM
#1
Launching!
Thread Starter
Join Date: Nov 2003
Location: pasadena
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Please Help Me, Guys I recently put hooker lt's on my car, also put the rear o2 sims, i didn't but the extensions but spliced them and made them myself. My TX emission sticker is due at the end of the month and I went today to see if it would pass and it failed. By the way this is a 96 Firehawk, the Service Engine light is not on either, Almost forgot, I took it to HPE to get the EGR removed from the computer. Anyways it runs smooth and no Engine light but it still failed..
It says Monitors Status
Catalyst Not Ready
o2 sensor Not ready
Egr sys Not Ready
I know my egr will fail b/c it was removed from the comp. but why are the other 2 failing, and what are they.. . . I can fail 2 and still pass this Inspection, PLEASE HELP GUYS THANKS...
It says Monitors Status
Catalyst Not Ready
o2 sensor Not ready
Egr sys Not Ready
I know my egr will fail b/c it was removed from the comp. but why are the other 2 failing, and what are they.. . . I can fail 2 and still pass this Inspection, PLEASE HELP GUYS THANKS...
