steps for TPS installation with ASR
01-28-2005, 03:12 PM
#1
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
steps for TPS installation with ASR 2001 camaro z28 m6
I have posted many times in the last 6 months about an RPM surging problem.
Well my SES light has finally come on, throwing a code for a bad Throttle position sensor. This leaves me with two questions:
Can the TPS, be the culprit in my RPM surging problems? even though it took so long for the SES light to come on!
I know how to remove the TPS and install a new but:
What is the proper procedure to installing a TPS??
How do you do the TPS learning procedure for a car with ASR??
Thank you for any assistance and advice!!!
I have posted many times in the last 6 months about an RPM surging problem.
Well my SES light has finally come on, throwing a code for a bad Throttle position sensor. This leaves me with two questions:
Can the TPS, be the culprit in my RPM surging problems? even though it took so long for the SES light to come on!
I know how to remove the TPS and install a new but:
What is the proper procedure to installing a TPS??
How do you do the TPS learning procedure for a car with ASR??
Thank you for any assistance and advice!!!
