Dual Electric Fans
#1
Teching In
Thread Starter
Join Date: May 2004
Location: Egham , Surrey, England
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Dual Electric Fans
Help needed to confirm I am doing things correctly.
I am using a Baker electonics controller with LS1 and stock pcm.
Fan outputs are Low and High speed when used with dual speed single fan.
But I want to drive one fan when Low is initiated and both fans when High is initiated.
Am I correct in assuming that when High is initiated Low is turned off ?
Thanks
I am using a Baker electonics controller with LS1 and stock pcm.
Fan outputs are Low and High speed when used with dual speed single fan.
But I want to drive one fan when Low is initiated and both fans when High is initiated.
Am I correct in assuming that when High is initiated Low is turned off ?
Thanks
#3
Teching In
Thread Starter
Join Date: May 2004
Location: Egham , Surrey, England
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MrDude_1
no... the PCM keeps the low one on, and just kicks in the additional high. they both run.