i think my iac is maxed out, tb screw all the way in, now what??
#1
i think my iac is maxed out, tb screw all the way in, now what??
so my iac is at 315, dont know if i can set it higher, i havent found anything and noone replied in my post. can i set it higher or no?
it idle i have a deviation as the iac increases above 225 iac steps. at idle i have about 45 iac position. my screw is in all the way and hasnt even tripped the tps to one yet. do i need a bigger screw for the tb stop or what? what can i do so my car runs better on cold start when its seeming it is starving for air?
it idle i have a deviation as the iac increases above 225 iac steps. at idle i have about 45 iac position. my screw is in all the way and hasnt even tripped the tps to one yet. do i need a bigger screw for the tb stop or what? what can i do so my car runs better on cold start when its seeming it is starving for air?
Trending Topics
#9
well mine wont read anything at idle still, but i flipped the screw over, im seeing .71 v at idle on the tps. when i turn the key on i hear the throttle open and shut?? i have traction control so i guess the computer thinks its hung or something?
anyway i did this and on start up the car ran shitty and then got better. the iac was still maxed out, now the problem is that as the idle slows down the iac closes too much i think lol it got down to 20 before it was all the way warm. do i maybe just have too much set airflow at cold start?
im not really sure about what to do here
anyway i did this and on start up the car ran shitty and then got better. the iac was still maxed out, now the problem is that as the idle slows down the iac closes too much i think lol it got down to 20 before it was all the way warm. do i maybe just have too much set airflow at cold start?
im not really sure about what to do here
#12
TECH Fanatic
iTrader: (35)
Join Date: Sep 2004
Location: Maryland/Illinois
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
I would try flipping the screw around or getting a longer one. I am wondering how much the vette's TB blades are open when they are idling. It might be interesting to relate it to your setup. Any vette guys know?