777

iTrader: (21)

I won't to know why I have the throttle position sensor code. First off I was adjusting the set screw on the TB and then later on I started the car. (trying to get the car to idle better) A code came up when I started the car. Now I went and got a new TP sensor and it still comes on. It goes off from time to time but it always comes back on within a day. What could cause this? I wouldn't think it would be adjust the set screw. I just got a new ported throttle body and the code is still on.

99whitews6

iTrader: (2)

First log and verify that you reset your TPS% to 0 at idle. Then log and find out what your TPS Voltage is at idle. I have experienced this exact same problem when my TPS voltage was above 0.78 at idle with TPS%=0.

777

iTrader: (21)

I don't have access to logging equip. Will it hurt anything, or will the ses light just stay on? I am going down to Tampa to get some relocation brackets welded in (that's where my tuner is also) hopefully it won't hurt anything because I don't have time to go down anytime real soon.