PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Need Help

Thread Tools
 
Search this Thread
 
Old 06-30-2005, 03:47 PM
  #1  
Staging Lane
Thread Starter
iTrader: (1)
 
LS198TA's Avatar
 
Join Date: Apr 2004
Location: TEXARKANA TX
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default Need Help

ok had a built 98 trans am had a wreck, bought a 99 z28 put all my drivetrain in the z. now i know the coil packs bolt in the center on the 99s but is there any other differances in them, cause its like my car is out of time it wont start but tries too.

when i crank it all i can smell is fuel anyone ran into this probem

thanks in advance
Old 06-30-2005, 05:19 PM
  #2  
TECH Addict
iTrader: (10)
 
wait4me's Avatar
 
Join Date: Feb 2003
Location: warsaw, in
Posts: 2,961
Likes: 0
Received 1 Like on 1 Post

Default

did you use the 99 computer and harness or the 98 computer and harness?
Old 06-30-2005, 05:38 PM
  #3  
Staging Lane
Thread Starter
iTrader: (1)
 
LS198TA's Avatar
 
Join Date: Apr 2004
Location: TEXARKANA TX
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

i used the 99 comuter and harness in the 99 z28 just put my motor and tranny in it from my 98 trans am.

i since then have replaced the spark plugs they were fowled out and it fired right up idles at 900 rpm with a custum tune i got via the internet from diablosport tuning downloaded into my predator from my computer.

mods
forged 347
magic stick 237/242/ .603/.609@113lsa
morgon motorsport heads
ls6 intake
hooker lt headers

Last edited by LS198TA; 06-30-2005 at 08:08 PM.




All times are GMT -5. The time now is 09:17 AM.