02ZOh6

Hi guys, I just finished with my ve table and am wondering what to do next. I'm using the stickied open loop method to tune and it says to re-enable closed loop and tune PE. At what point do you tune the MAF and is it necessary? I have and 02 Z06, 1 3/4 Kooks w/cats, GHL cat-back and a halltech trap air intake. My MAF is stock. Thanks for any help.

Black02SS

iTrader: (36)

What program are you using? HPT or EFI Live FlashScan. If you are using HPT there is a sticky at the top that has a spreadsheet for calibrating the MAF. If you own FlashScan, you can do it all in the program without a spreadsheet.

02ZOh6

Thanks for the response 02 SS. I'm using HPT. I'm going to have to create a sig. I've found what I was looking for. Thanks again.