Any problems tuning off 02's with a handheld programmer?
#1
Launching!
Thread Starter
Any problems tuning off 02's with a handheld programmer?
Both of my 02 voltages are in the 0.925 and 0.930 range and I'm thinking about taking out fuel using a hand held programmer until I either hit a minimum of 0.900 02's or get KR first where I'll add a little more fuel back.
Are there any serious problem doing this? I'll be scanning with AutoTap. I know it's not the best way to do it, but the nearest dyno tuner is about 2.5 hours away from me and I don't mind running a conservative tune. My only mods are lid, kooks LT w/catted y, GMMG exhaust, yank SS3200 converter, stock 3.23 gears on a 01 TA.
Thanks!
Adam
Are there any serious problem doing this? I'll be scanning with AutoTap. I know it's not the best way to do it, but the nearest dyno tuner is about 2.5 hours away from me and I don't mind running a conservative tune. My only mods are lid, kooks LT w/catted y, GMMG exhaust, yank SS3200 converter, stock 3.23 gears on a 01 TA.
Thanks!
Adam