ORANGE JUICE1

I am getting a code "knock sensor bank 2 low voltage" I assume that one of my knock sensors needs to be replaced. Will this have any affect on tuning the car. I really don't want to have to pull off the intake at this time.

NoGo

iTrader: (2)

You need to replace the knock sensor.

If the knock sensor fails you will be cursed to a lower timing until it is replaced. It will dramatically effect tuning, unless the tuner is savy enough to turn off the KR detection during the session.

2000WS6Vert

It may not be due to an actual sensor failure but could be a pinch/break in the wiring harness. I had to replace my wiring because I pinched it when I did the LS6 intake installation.