PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

C6Z cuts ignition then flashes locked symbol

Old 03-04-2018, 06:23 PM
  #1  
Teching In
Thread Starter
 
monstergremlin16's Avatar
 
Join Date: Aug 2009
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default C6Z cuts ignition then flashes locked symbol

2008 Corvette zo6

Has anyone ran into this before? Randomly during driving (mostly at full throttle) the ignition will cut and the dash will flash the locking symbol until the car stops and you turn the ignition off. Then the car will start just fine and be good until it happens again.

I'm a sorry if this is the wrong section.
Old 03-07-2018, 06:36 PM
  #2  
Teching In
Thread Starter
 
monstergremlin16's Avatar
 
Join Date: Aug 2009
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Solved! As it turns out, it was a broken connector on the BCM. I replaced that and we're good to go.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:22 AM.