AFR for high RPM but low load?
12-31-2005, 04:56 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Valdosta, georgia
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
AFR for high RPM but low load? I'm gonna do the typical 12.5-12.8 for high loads but my question is do you think say like 5500rpm and lower loads like 30Kpa (coast down from WOT) would stoic of 14.7 be fine?
