What causes DTC PO751?
06-29-2002, 07:32 PM
#1
TECH Addict
Thread Starter
Join Date: Feb 2002
Location: Lewisville, Texas
Posts: 2,319
Likes: 0
Received 0 Likes
on
0 Posts
What causes DTC PO751? About once a week I get an SES light, the code shown on autotap is PO751 1-2 shift solenoid stuck closed. What would be the cause of this? TIA,
P.S, I have a Transgo shift kit installed.
Mark
<small>[ June 30, 2002, 11:38 AM: Message edited by: Elite_Hot_Rod ]</small>
P.S, I have a Transgo shift kit installed.
Mark
<small>[ June 30, 2002, 11:38 AM: Message edited by: Elite_Hot_Rod ]</small>
06-30-2002, 06:50 PM
#2
TECH Addict
Thread Starter
Join Date: Feb 2002
Location: Lewisville, Texas
Posts: 2,319
Likes: 0
Received 0 Likes
on
0 Posts
Re: What causes DTC PO751? Come on guys surely someone has seen this code before and knows what causes it. Let's hear it...please. Tia,
Mark
Mark
07-01-2002, 06:03 AM
#3
TECH Addict
Join Date: Nov 2001
Location: Live Oak, FL - in the woods where the creatures lurk.
Posts: 2,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: What causes DTC PO751? What year/ what mods? I think this code comes up on some '01+ cars with a higher stall TC. If the rpm on the 1-2 shift increases between shifts very much it causes the problem. Might try searching the drivetrain forum.
07-01-2002, 10:26 PM
#5
TECH Addict
Thread Starter
Join Date: Feb 2002
Location: Lewisville, Texas
Posts: 2,319
Likes: 0
Received 0 Likes
on
0 Posts
Re: What causes DTC PO751? Thanks Guys,
It's a 99 T/A mods are in the sig. Where is the solenoid located? Please don't tell me it's internal to the transmission, I don't really want to drop the pan. Does anyone have the part number for the 1-2 shift solenoid? Thanks again,
Mark
It's a 99 T/A mods are in the sig. Where is the solenoid located? Please don't tell me it's internal to the transmission, I don't really want to drop the pan. Does anyone have the part number for the 1-2 shift solenoid? Thanks again,
Mark
07-02-2002, 07:22 AM
#6
TECH Addict
Join Date: Nov 2001
Location: Live Oak, FL - in the woods where the creatures lurk.
Posts: 2,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: What causes DTC PO751? Yup, got to drop the pan to replace it.
I'm not saying it HAS to be replaced, but to get to it you have to drop the pan. If you're under the trans while facing the front of the car/trans it's the solenoid on the left rear,at least according to the Helms manual.
I'm not saying it HAS to be replaced, but to get to it you have to drop the pan. If you're under the trans while facing the front of the car/trans it's the solenoid on the left rear,at least according to the Helms manual.
